The following procedures should be followed before service work is carried out on the electronic

Parking brake system fitted to the Ford S-max/Galaxy models 2006-2008.

 

The following pre-requisites should be met before commencing:

• Vehicle on level ground
• Ensure vehicle battery is fully charged

 

Service mode activation (EPB off)

• Release the parking brake
• Switch ignition ON (pos 2)
• Press and hold down throttle pedal
• Press and hold down the parking brake switch
• Switch ignition Off (pos 0)
• Switch ignition ON (pos 2) within 5 seconds
• When the parking brake has fully actuated (off) switch ignition OFF (pos 0)
• Release throttle pedal
• Release parking brake switch

 

Service mode de-activation (EPB on)

• Switch ignition ON (pos 2)
• Press and hold down throttle pedal
• Lift and hold the parking brake switch
• Switch ignition Off (pos 0)
• Switch ignition ON (pos 2) within 5 seconds
• When the parking brake has fully actuated (on) switch ignition OFF (pos 0)
• Release throttle pedal
• Release parking brake switch

Article from:How to Release Ford S-Max/Galaxy EPB Manually